09CuPCrNi-A hardness CNC cutting

BEBON Iron & Steel has fully passed the ISO9001 quality system certification, marine steel has passed 9 countries' classification societies, and construction steel has obtained the CE Lloyd's CE Mark certification. The main body of 09CuPCrNi-A hardness steel passed ISO14001 environmental management system certification and OHSAS18001 occupational health and safety management system certification. The main 09CuPCrNi-A hardness production processes and technical equipment of the enterprise have reached the international advanced level, the comprehensive competitiveness has entered the international advanced ranks, and the international influence has been significantly enhanced.

Q355GNHE corten steel is characterized by adding a small amount of Cu, P, Cr, Ni and other alloying elements to the steel, so that the steel material forms a dense layer between the rust layer and the substrate with a thickness of about 50 to 100 μm and good adhesion to the substrate metal. The amorphous spinel oxide layer prevents oxygen and water in the atmosphere from penetrating into the steel substrate, slows down the rust development to the steel material, 09CuPCrNi-A hardness, and greatly improves the steel material's resistance to atmospheric corrosion.

The company always adheres to the concept of green production, follows the development path of innovation, transformation and improvement, and has carried out in-depth cooperation with Zhengzhou University and other scientific research institutes, planning from a high starting point, strict standard design, and successfully implementing engineering projects With nearly 20 research and development projects, the company's production technology and equipment are at the forefront of the industry, and indicators such as environmental protection, energy consumption, cost, and resource utilization have reached the advanced level in the industry.

Hot Rolled Plates 09CuPCrNi-A hardness MachiningAfter final forging/forming and Heat treatment process, all the pipe Fittings, Flanges, Fasteners, Etc. are sent for machining i.e. and preparation, O/D and I/D matching as per dimensional codes. An Expert Q.C. engineer is involved and he keeps constant vigil on every machining operation. Step machining is carried out as required by the codes. GO and NO-GO gauges are used to check the O/D & I/D of the fittings, Flanges, etc.