1inch structural steel cold rolled 05CuPCrNi for sale

The effect of nitrogen (N) on the properties of cold rolled 05CUPCRNI and so on steel is similar to that of carbon and phosphorus. With the increase of nitrogen content, the strength of steel can be significantly improved, especially the plasticity, especially toughness, and the weldability will be decreased, and the cold brittleness will be intensified. At the same time, aging tendency, cold brittleness and hot brittleness will be increased, which will damage the weldability and cold bending property of steel. Therefore, the nitrogen content in cold rolled 05CUPCRNI and so on steel should be reduced and limited as much as possible. Generally, nitrogen content should not be higher than 0.018%.

Welded steel pipe refers to the steel pipe with a joint on the surface which is welded after the steel strip or steel plate is bent and deformed into circular, square and other expected shapes. According to different welding methods, it can be divided into arc welded pipe, high frequency or low frequency resistance welded pipe, gas welded pipe, furnace welded pipe, Bondi pipe, cold rolled 05CUPCRNI, etc. According to the weld shape, it can be divided into straight welded pipe and spiral welded pipe. Electric welded steel pipes are mainly used in oil drilling and production, machinery manufacturing, etc.; furnace welded pipes can be used as water gas pipes, large-diameter straight seam welded pipes for high-pressure oil-gas transmission, etc.; spiral welded pipes are used for oil-gas transmission, pipe piles, piers, etc. Welded steel pipe has lower cost and higher production efficiency than seamless steel pipe.

5mm 6mm hot rolled thin plates product cold rolled 05CUPCRNI inventory: 5*3000*8000, 5*3000*8400, 6*2800*9390, 5*2800*11880, 6*2614*7050, 5*3000*11650, 5*3000*9900, 5*3000*8300, 6*2854*8200, 5*2790*10500, 6*2854*9680, 5*3000*8800, 6*2854*7480, 6*2614*9250, 5*2990*10470, 5*3000*8600, 6*2800*9390, 6*2854*8500, 5*2990*10400, 5*2990*9000, 6*2854*6480, 6*2854*6800, 5*3000*7550, 6*2854*9390.

Weathering steel generally adopts the process route of fine material into the furnace-smelting (converter, electric furnace-microalloying treatment-argon blowing-LF refining-low superheat continuous casting (feeding rare earth wire)-controlled rolling and cooling. The scrap steel is added into the furnace together with the charge, and smelted according to the conventional process. After the cold rolled 05CUPCRNI steel is tapped, deoxidizers and alloys are added. After the molten steel is treated with argon blowing, the molten steel is cast. By adding rare earth elements to the steel, the cold rolled 05CUPCRNI weathering steel is purified and the content of inclusions is greatly reduced.