Export great 08cupvre plate to Kenya

The difference between alloy steel plate and carbon steel has the following points. First, the hardenability of carbon steel is low, and the maximum diameter of water quenching of carbon steel is only 10 mm to 20 mm; second, the strength of carbon steel is only 235 MPa, while that of alloy steel is more than 360 MPa. Third, carbon steel has poor tempering stability. In order to ensure high strength, low tempering is used for carbon steel during quenching and tempering treatment, so the toughness of the carbon steel is insufficient. Fourth, the corrosion resistance, low heat resistance, and wear resistance of carbon steel cannot be compared with alloy steel, 08CUPVRE plate.

The Performance requirements of low alloy structural steel, 08CUPVRE plate:(1) High strength: generally, the yield strength is above 300Mpa.(2) High toughness: the elongation is required to be 15% - 20%, and the room temperature impact toughness is greater than 600kJ/m ~ 800kJ/m. For large welded components, higher fracture toughness is required.(3) Good weldability and cold forming property.(4) Low cold brittle transition temperature. (5) Good corrosion resistance.

Punchability refers to the performance of metal without cracks and other defects after stamping deformation. Many steel products are manufactured through a stamping process. In order to ensure the quality of the products and the smooth progress of the process, the 08CUPVRE plate, steel plates and strips used for stamping must have qualified stamping performance.

Our products have perfect after-sales system to protect the interests of customers. At the same time, we can according to 08CUPVRE plate customer's requirements, processing requirements, cutting technical requirements, etc., to develop detailed solutions for customers, so as to make customers 100% satisfied. If you have any requirements and needs, please contact us in time.

We should help solve the customer's problems in time, not just verbally, without solving the problems or shirking the responsibility. Improving after-sales efficiency can make customers feel respect. We should take their problems seriously and show sincerity. It can also give customers a good impression and reduce the negative impact.