hot rolled 09CuPCrNi-B steel transportation

Our team is a dynamic, but also mature and steady team. The talents are made of different ages. There are experienced ones, and also creative ones, that also makes our company culture diversified. We have complete department structure, to make the whole work procedure run smoothly. For every step, we have special person to be in charge and responsible for our customer and update information to the customer in time. So you just need not worry too much to purchase steel materials from our company.

Carbon steel hot rolled 09CUPCRNI-B is an iron carbon alloy with carbon content less than 2.11% and a small amount of silicon, manganese, sulfur, phosphorus and other impurities. Carbon steel inevitably contains some impurity elements during smelting, which has a great influence on the performance and quality of steel, so it should be controlled. The quality of carbon steel is mainly measured by the content of sulfur and phosphorus. The lower the hot rolled 09CUPCRNI-B content of sulfur and phosphorus, the better the quality of carbon steel.

40Cr grade under GB/T 3077-2015 standard is a alloy steel bar material. hot rolled 09CUPCRNI-B, 40Cr alloy chemical composition (C: 0.37 ~ 0.44, Si: 0.17 ~ 0.37, Mn: 0.50 ~ 0.80, Cr: 0.80 ~ 1.10, Ni: ≤0.30, P: ≤0.030, S: ≤0.030, Cu: ≤0.30, Mo: ≤0.10). Heat treatment: First quenching heating temperature (℃): 850; coolant: oil; Temperature heating temperature (℃): 520. 40Cr steel tensile strength (σb / MPa): ≥980. Yield point (σs / MPa): ≥785

Different form hot rolled 09CUPCRNI-B, boiler steel plate is one of the most critical materials in boiler manufacturing. Boiler steel plate mainly refers to the hot-rolled special carbon steel and low alloy heat-resistant steel plate used to manufacture important components such as the shell, drum, header end cover, support and hanger in the boiler. Boiler steel plates are often working under medium, high temperature and high pressure. In addition to withstand higher temperatures and pressures, boiler steel plates are also subject to impact, fatigue loads, and water and gas corrosion, resulting in poor working conditions.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.

If you want to find wear resistant steel plates or abrasion resistant steel supplier and exporter in China, please visit us. We are one of the leading hot rolled 09CUPCRNI-B wear resistant steel plates manufactures and stock keepers. We have large stocks for wear resistant steel plates of various grades and dimension. We can not only send offer at the first time, but can also provide technical support and give you professional suggestions and answers about NM400 hot rolled 09CUPCRNI-B steel specifications, difference between hardox 400 and AR400 and so on question about wear resistant steel plates. Come on! Just call us or send email.