05CuPCrNi steel properties stock 1000tons inventory in Yemen

SA299GrB steel plates with a thickness of less than or equal to 50mm are usually delivered in the rolled state, and can also be delivered in the state of normalizing, stress relief, or normalizing plus stress relief. Steel plates with a thickness greater than 50mm should be normalized heat treatment. It can also add flaw detection standard requirements, flaw detection level requirements, alloy element composition control requirements, etc. according to needs.

35SiMn steel chemical elements: C: 0.32-0.40, Si: 1.10-1.40, Mn: 1.10-1.40. The mechanical properties of 35SiMn steel: tensile strength 885 MPa; yield strength 735 MPa; elongation after fracture: 15; reduction of area: 45; impact energy: 47J. 35SiMn steel belongs to alloy quenched and tempered steel with good properties and can be used instead of 40Cr steel. After quenching and tempering, 05CUPCRNI steel properties, 35SiMn steel has high static strength, fatigue strength, wear resistance, good toughness, good hardenability and medium plasticity during cold deformation.

After-sales service is an important part of measuring a product good or not. After sales service can't be ignored. Good service can really make consumers feel relieved. We have always done a good job in after-sales service, so as to bring consumers a better reference when purchasing and a better experience during use of our steel materials. We will call back and follow up the performance of our steel products regularly.