05CuPCrNi steel yield 25mm market price

Q355GNHE corten steel is characterized by adding a small amount of Cu, P, Cr, Ni and other alloying elements to the steel, so that the steel material forms a dense layer between the rust layer and the substrate with a thickness of about 50 to 100 μm and good adhesion to the substrate metal. The amorphous spinel oxide layer prevents oxygen and water in the atmosphere from penetrating into the steel substrate, slows down the rust development to the steel material, 05CUPCRNI steel yield, and greatly improves the steel material's resistance to atmospheric corrosion.

Mg element can reduce the number, size, distribution and morphology of inclusions in steel such as 05CUPCRNI steel yield. Micro Mg can improve the size and distribution of carbides in bearing steel. And the carbide particles of bearing steel containing magnesium are fine and uniform. When Mg content is 0.002% - 0.003%, the tensile strength and yield strength of the steel increase by more than 5%, and the plasticity remains basically unchanged.

Flat steel is a kind of steel with rectangular cross-section and blunt edges at the edges and corners. It is usually 12-300 mm wide and 3-60 mm thick. Compared with 05CUPCRNI steel yield ordinary steel plate, the utilization rate of flat steel is increased by one to five percentage points. Moreover, flat steel can be produced with fixed thickness, width and length according to the user's requirements, which saves the cutting process for users, reduces the consumption of labor and materials, and also reduces the processing loss of raw materials, saving time, labor and material.