09CuPCrNi-A steel standad width＜600mm hot rolled tool steel

Weather resistant steel, as a new generation of advanced steel materials, has atmospheric corrosion resistance 2 to 5 times that of ordinary carbon steel. The longer it is used, the more prominent the corrosion resistance. Because it has the characteristics of rust resistance, no coating, thinning and consumption reduction, labor saving and energy saving, weather resistant steel can be applied to steel structures used in buildings, vehicles, bridges, towers and other long-term exposure to the atmosphere, 09CuPCrNi-A steel standad and can also be used to manufacture containers and railway Structural components such as vehicles, oil derricks, seaport buildings, and oil platforms.

Every after-sales service shall have a detailed record of the customer's product problems and handling methods. The records shall be sorted into volumes and filed on a monthly basis, and submitted to the technical department for filing. The problems found in the after-sales service shall be summarized in a timely manner, discussed with the technical department, the quality inspection department and the production department, and a proper solution shall be proposed for the technical department to improve in a timely manner;

The advantages of 09CuPCrNi-A steel standad, seamless steel pipe are high pressure resistance, good toughness, long pipe section and few joints. It is widely used and the rolling technology of domestic steel mills is also very mature. Compared with round steel, the weight of seamless steel pipe is lighter under the same strength. Seamless steel pipe manufacturing ring parts, can improve the utilization of materials, simplify the manufacturing process, save materials and processing time. Compared with the welded pipe, there is no weld on the outer surface of seamless steel pipe, and it has good compression resistance.

Laser cutting is that the horizontal laser beam emitted by the laser changes into a vertical downward laser beam through the 45° total reflector, and then focuses through the lens, forming a tiny spot at the focal point. When the spot hits the material, the material is heated to the vaporization temperature quickly, and evaporates to form a hole. With the movement of the beam on the material such as 09CuPCrNi-A steel standad, the auxiliary gas (carbon dioxide gas, oxygen, Nitrogen, etc.) blow away the melted slag, make the hole continuously form a very narrow width (such as about 0.1mm) cutting seam, and complete the cutting of materials.