09CuPCrNi-B steel heat treatment top manufacturer in Switzerland

What are the characteristics of medium and thick plate, 09CUPCRNI-B steel heat treatment? First, the performance of shock resistance and vibration is very good, so the application of medium and thick plates in buildings and bridges can greatly improve the safety. Second, the bearing capacity of medium and thick plate, 09CUPCRNI-B steel heat treatment is good, the performance is excellent. The bridge, the automobile girder steel plate, and buildings have strict load-bearing requirements, and it is easy to cause accidents if the steel materials not meet the requirements, so the selection of steel is more stringent.

Structural steel plate 09CUPCRNI-B steel heat treatment discount online 15*2320*9790, 12.5*2060*7410, 12*1540*5390, 12.5*1730*14930, 11*3910*6450, 17*2000*10650, 13.5*1905*8920, 6*1730*7840, 12.5*3790*8900, 12.5*3600*8810, 32*1301*6600, 12.5*1530*8000, 12*1590*9770, 16*2300*14200, 14.5*3690*10960, 20*2100*8950, 6*1800*4500, 14*1700*9200, 12.5*1790*15910, 5*1829*6096, 13*3200*10700, 9*1301*4000, 11*1510*5370, 12.5*1730*14770, 12.7*1829*6096, 13*2970*9800, 13.5*2890*5350, 12.5*2145*10360, 14*1860*13880, 24*2715*7800.

X-rays or γ-rays are projected on the surface of the steel plate, and rubber can be placed on the other side of the steel plate. Since the radiation propagates through the steel plate and is absorbed, the intensity is different due to the presence or absence of defects, so the film can record the shape and position of the defects. This 09CUPCRNI-B steel heat treatment method is sensitive to the detection of common steel plate defects such as slag inclusions, porosity and pores. The disadvantage is that it is difficult to find the specific depth of the defect and it is not easy to find cracks.

Laser cutting is that the horizontal laser beam emitted by the laser changes into a vertical downward laser beam through the 45° total reflector, and then focuses through the lens, forming a tiny spot at the focal point. When the spot hits the material, the material is heated to the vaporization temperature quickly, and evaporates to form a hole. With the movement of the beam on the material such as 09CUPCRNI-B steel heat treatment, the auxiliary gas (carbon dioxide gas, oxygen, Nitrogen, etc.) blow away the melted slag, make the hole continuously form a very narrow width (such as about 0.1mm) cutting seam, and complete the cutting of materials.