09CuPCrNi-B steel material machinability

Preheating cutting: The most effective way to prevent steel plate cutting cracks is to preheat before cutting. Before flame cutting, the steel plate is usually preheated, and the preheating temperature mainly depends on the quality level and thickness of the steel plate. The preheating method can be carried out with flame burner, electronic heating pad, or heating furnace. In order to determine the preheating effect of the steel plate, the required temperature should be tested at the heating point.

09CUPCRNI-B steel material 1000 tons in warehouse5.5*3000*5000, 7*2920*8780, 7*1850*6000, 7*2920*13000, 5*2570*8000, 6*2750*9600, 5.5*2450*6500, 6*1850*7510, 6*1750*8500, 7*2560*8600, 8*1620*7870, 8*1500*4850, 8*3040*4000, 7*2920*8780, 10*1500*6850, 5*2570*8150, 6*2310*8500, 8*1700*6300, 5*2490*8200, 8*2100*7800, 10*3000*4750, 10*1750*6000, 5*2490*9000, 8*2090*6640.

The main function of boron in 09CUPCRNI-B steel material and so on steel is to increase the hardenability of steel, so as to save other rare and precious metals, such as nickel, chromium and molybdenum. For this purpose, the boron content is generally regulated in the range of 0.001% - 0.005%. It can replace 1.6% nickel, 0.3% chromium or 0.2% molybdenum. It should be noted that molybdenum can prevent or reduce temper brittleness, while boron slightly promotes temper brittleness, so molybdenum can not be completely replaced by boron.

We provide customers with demand support and better serve them. We are committed to actively meet the needs of customers, always keep in touch with them in a timely manner, leave a good impression for customers, and make customers satisfied through our unremitting efforts. Customer satisfaction is our most basic vision, striving to become the best steel product service provider in the world