09cuptire-a steel coil plate surface test

We can process the steel materials according to your drawing. Or if you can not make drawing, please send us 09CUPTIRE-A steel coil specific data and requirements, our technical department can make design and drawing for you, and then confirm with your technician or engineer. If all is OK, our processing center will process the steel materials according to the drawing. So no matter what size and shapes you need, we can meet demands at the most time.

27SiMn steel plate has high strength and wear resistance, high hardenability, good machinability, moderate cold deformation plasticity and weldability. In addition, the toughness of 27SiMn steel does not decrease much during heat treatment, but it has quite high strength and wear resistance, especially when water quenching still has high toughness; but this steel is highly sensitive to white spots and has temper brittleness during heat treatment. Tendency and sensitivity to overheating.

The purpose of 09CUPTIRE-A steel coil quenching is to transform the supercooled austenite into martensite or bainite to obtain a martensite or bainite structure, and then cooperate with tempering at different temperatures to greatly improve the strength, hardness, performance, fatigue strength, toughness, and wear resistance etc. of 09CUPTIRE-A steel coil. So as to meet the different use requirements of various mechanical parts and tools. Quenching can also help to get the ferromagnetic, corrosion resistance and other special physical and chemical properties of certain special steels.

As per JIS G3101 standard, the Carbon (C), Silicon (Si) and Manganese (Mn) content of SS400 steel plate are not controlled. Phosphorus (P) content of 09CUPTIRE-A steel coil, JIS SS400 steel plate is 0.050% Max and Sulphur (S) content is 0.050% Max. The SS400 steel melting point is 1430 Degree Celsius, Brinell Hardness is 160HB, density is 7.85g/cm3, Young’s Modulus is 190-210Gpa. The strength and elongation of JIS SS400 steel plate varies with thickness. Generally, the tensile strength of SS400 steel plate is 400-510 Mpa. Elongation is above 21%. Yield strength ≥245Mpa for thickness≤16mm. When the JIS SS400 steel plate is thciker than 100mm, the yield strength shall not less than 205Mpa.

The trend of international shipping development of large-scale ships and strategic joint ventures puts forward higher requirements for modern ports. Modern ports no longer use the general cargo throughput as a measure sign, and container throughput will become the main sign to measure the role and status of modern ports. The average container capacity in 2000 is 3200teu, and it is expected to be 5500teu in 2020.

Our company has been established for 20 years and has accumulated rich experience in steel products. At the same time, it is often exported to Southeast Asia, Africa, South America and other countries. So you can rest assured that our 09CUPTIRE-A steel coil products and our prices are very favorable. Because we have our own factory, there is no other cost, we can also carry out machining and so on.