20mm thickness usage of 08cupvre steel price

Based on the principle of win-win and mutual benefit, the company operates in good faith, strictly controls the quality, and provides perfect after-sales service, which has won unanimous praise. The success of the company is not only the usage of 08CUPVRE steel hard work and wisdom of the company's employees, but also the deep love of the majority of consumers. It also inspires all employees of the company to have the courage to strive. We will continue to innovate and leap forward, create greater brilliance of the enterprise, and make our own contribution to the development of the usage of 08CUPVRE steel steel industry.

40Cr alloy belongs to gb3077 "alloy structural steel". The carbon content of 40Cr steel is 0.37% ~ 0.44%, which is slightly lower than that of 45 steel. The content of Si and Mn is equivalent, and the content of Cr is 0.80% ~ 1.10%. In the case of hot rolling supply, the 1% Cr basically does not work, and their mechanical properties are roughly the same. Because the price of usage of 08CUPVRE steel is about half of that of 45 steel, 40Cr is not needed for the purpose of economy.

Main characteristics of 12Cr1MoV Steel: compared with 12CrMoV steel, 12Cr1MoV steel has higher oxidation resistance and thermal strength. The creep limit of 12Cr1MoV steel is very close to the endurance strength value, and it has high plasticity under the condition of endurance tension; the processability and weldability of 12Cr1MoV steel are good, but it needs to be preheated to 300 ℃ before welding, and stress removal treatment after welding. 12Cr1MoV steel is widely used in Superheater, header and main steam pipe of high pressure, ultra-high pressure and subcritical utility boiler.

TMCP process is an indispensable technology for our production of low alloy high strength wide and usage of 08CUPVRE steel thick steel plates. TMCP process can produce steel with high strength and toughness without adding too many alloy elements and complex subsequent heat treatment. TMCP is a process that can save alloy usage of 08CUPVRE steel and energy and is beneficial to environmental protection. A lot of our shipbuilding steel plates are produced by TMCP process.

usage of 08CUPVRE steel, API 5L X52 steel with the thickness range is 1.2-40mm, the width range is 1220-4200mm, and the length range is 5000-18000mm. API 5L X52 steel’s mechanical properties is the yield strength 300MPa, and the tensile strength 460MPa. To be specified in details: Maximum content for C≤0.28%, Mn≤1.4%, P≤0.030%, S is 0.030%, V+Nb+Ti≤0.15%, Copper maximum is 0.50%, nickel maximum 0.50%, chromium 0.50%, Molybdenum 0.15%.

The results of adopting two-level usage of 08CUPVRE steel service system and implementing standardized management are mainly reflected in the formation of vigorous work style such as quick response and quick action. Our company's customer service center stipulates that employees must be accurate and quick in technical support and usage of 08CUPVRE steel after-sales service. Through the formation of this fast, agile, vigorous style, to provide users with satisfactory service.