Basic knowledge of 09CuPTiRE-B material equivalent

30CrNi3MoV (675) high-strength steel is a new type of high-strength steel newly developed and put into use in China. It is a steel plate for armored vehicles. 30CrNi3MoV steel is developed by V microalloying on the basis of the original Cr-Ni-Mo series low-alloy ultra-high-strength steel, and appropriately adjusting the content of other alloying elements. The milling performance of 30CrNi3MoV steel is poor.

The company has allocated special environmental protection facilities for all 09CuPTiRE-B material equivalent pollution sources, strengthened the recycling of waste resources and improved the efficiency of resource utilization. At present, the recovery and utilization rate of solid wastes such as iron slag, steel slag, iron bearing dust, 09CuPTiRE-B material equivalent steel mill scale, environmental protection dust has reached 100%.

If the chromium content in 09CuPTiRE-B material equivalent alloy steel reaches about 12%, dense chromium oxides will be formed on the surface of the steel, which will greatly improve the corrosion resistance of steel in oxidizing media. Chromium, aluminum, silicon and other elements can improve the oxidation resistance of steel and the corrosion resistance of high-temperature gas, but excessive aluminum and silicon will deteriorate the thermoplasticity of steel.

The microstructure of the quenched and tempered alloy steel, 09CuPTiRE-B material equivalent after conventional heat treatment is tempered sorbite. For parts with wear-resistant surface (such as gears and spindles), induction heating surface quenching and low-temperature tempering are carried out, and the surface structure is tempered martensite. The surface hardness can reach 55HRC-58HRC. After quenching and tempering, the yield strength of quenched and tempered alloy steel is about 800MPa, the impact toughness is 800kJ / m2, and the core hardness is 22HRC - 25HRC. If the cross-section size is large but not quenched, the properties will be significantly reduced.

The company conducts periodic and targeted training and guidance for after-sales service personnel. As the saying goes, "no one is perfect, no gold is red", to help after-sales service personnel improve service skills and correct service attitude. Carry out relevant technical training for after-sales service personnel, so that after-sales service practitioners have professional product knowledge.