hot rolled 09cupcrni-a Hot Rolled Plate 2020

Medium thick steel plate refers to the steel plate with a thickness of not less than 3 mm but less than 20 mm. It can be produced by reversible hot rolling medium and heavy plate mill, and its thin products can also be processed by cold rolling mill. hot rolled 09cupcrni-a, Medium thick steel plates are mainly used in boilers, shipbuilding, railway cars, automobiles, containers, military industry, national defense, construction, bridges and containers.

The alloy wear-resistant layer of hot rolled 09cupcrni-a, wear-resistant steel plate is mainly composed of chromium alloy, and other alloy components such as manganese, molybdenum, niobium and nickel are added. The carbide in the microstructure is fibrous distribution, and the fiber direction is vertical to the surface. The alloy carbide has strong stability at high temperature, maintains high hardness, and has good oxidation resistance. It can be used normally within 500℃.

Blast furnace ironmaking is a traditional ironmaking method based on coke energy. It cooperates with converter steelmaking and is the main method of producing hot rolled 09cupcrni-a steel at present. This dominance of blast furnace ironmaking is not expected to change for quite a long time. The essence of blast furnace ironmaking is the reduction of iron. Besides, coke is used as fuel and reducing agent. At high temperatures, iron ore or iron-containing raw materials are reduced from an oxide or mineral state to liquid pig iron.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.