Mild steel steel 05CuPCrNi material vs shipbuilding steel

The development steel 05CUPCRNI material of the company comes from the resource advantage, service advantage, logistics advantage and brand advantage established over the years, and it is also inseparable from the full support of new and old customers. We will uphold the support of all sectors of society, actively provide users with steel 05CUPCRNI material high-quality and efficient services, work together for win-win, and create a better tomorrow!

S50C steel plate is a high-quality high-quality medium carbon steel. S stands for steel, which means iron, and 50 stands for carbon content of 0.50%. C represents carbon steel, which means that S50C is a carbon steel with a carbon content of 0.50%.Mechanical properties of S50C steel plate:Tensile strength σb (MPa): ≥630 (64); Yield strength σs (MPa): ≥375 (38); Elongation δ5 (%): ≥14; Reduction of area ψ (%): ≥40; Impact Work Akv (J): ≥31(4); Impact toughness value αkv (J/cm2): ≥39(4)Hardness: unheated, ≤241HB; annealed steel, ≤207HB

Special boiler steel is derived from carbon structural steel. The chemical composition of boiler steel is basically the same as that of high-quality carbon structural steel of the same level, but the steel 05CUPCRNI material steel mechanical property requirements are more strict, especially for impact toughness. And the aging sensitivity is required to be small. The boiler steel should be deoxidized and the non-metallic inclusions should be removed during smelting. The structure should be uniform. The grain size should be controlled in 3-7 grades. The defects such as interlayer, shrinkage, porosity and porosity should be minimized.

Cold rolled steel 05CUPCRNI material steel sheet can be produced by two high mill, four high reversing mill, multi high reversing mill and tandem cold mill. Although there are still only two work rolls in four high and multi high rolling mills, each work roll is supported by one or more large diameter backup rolls, which can prevent deflection of work roll. As a result, wide and thinner steel 05CUPCRNI material steel plates can be produced. For example, 20 high mill can produce as thin as 0. 001 mm sheet, but the two high mill can only produce as thin as 0. 35mm sheet

GB/T 1591-2008 Q460E material is a high strength low alloy steel plates. Q460E steel product size steel 05CUPCRNI material: 3*1500*5900, 4*1500*6000, 48*3130*10100, 47*2610*8450, 3*1500*6000, 6*2000*8000, 48*2880*8550, 48*3130*10400, 5*1500*4150, 10*2000*8000, 48*2610*8700, 48*3170*10800, 5*1500*6000, 8*2000*2800, 47*2600*7000, 48*2880*3900, 16*2160*3300, 8*2000*8000, 47*2610*8700, 48*3150*10700, 5*1500*6000, 48*3130*10400 (mm).

If customers have any difficult problems during use of the steel materials, they can contact the company's after-sales service department to feedback the existing problems. The after-sales department will reply as soon as possible to ensure that each customer has a good after-sales experience. Under special circumstances, the after-sales service department will start the problem-solving process, and the engineers in charge of the area will quickly follow up to solve the problem.