New Delhi 09CuPCrNi-A chemical composition Prime Quality Exporter

Standing at a new historical starting point, we adapt to the requirements of supply side 09CuPCrNi-A chemical composition structural reform, adhere to the overall strategy of "innovation driven, quality leading, quality improving and efficiency increasing, transformation and development", and constantly improve the development concept and development level with a forward-looking vision and grand vision. Now we have been ranked the International leading 09CuPCrNi-A chemical composition steel materials supplier.

Our 12Cr2Mo1VR steel plate breaks through the specification limit, with a thickness of 09CuPCrNi-A chemical composition up to 180 mm and a single weight of 43.7 tons. The flaw detection can meet the highest level of NB / T47013 flaw detection level. Its thickness and unit weight exceed the production limit of vanadium steel. The 12Cr2Mo1VR steel plate with such specifications has high technical requirements, severe performance requirements, and great production difficulties. In the 09CuPCrNi-A chemical composition production process, it is easy to appear the tail area defects, which will cause the steel plate to fail inspection. So please choose your suppliers carefully.

For S420NL weldable fine grain structural steel plate, it is produced under specification EN 10025-3. The yield strength of S420NL plate shall be above 420Mpa for the thickness below 16 millimeter, 400MPa min. for thickness below 40mm, 390MPa min. for thickness below 63mm. The tensile strength for thickness below 100mm of this steel grade S420NL shall be within 520-680Mpa. For the Mill test certificates of steel S420NL,09CuPCrNi-A chemical composition, our mill would like to issue format according to EN 10204 3.1.

The wear-resistant plate 09CuPCrNi-A chemical composition shows good wear resistance: the chemical composition of the alloy layer contains 4-5% carbon and 25-30% chromium. The volume fraction of Cr7C3 carbide in the metallographic structure is more than 50%, the macro hardness is HRC56-62, and the hardness of chromium carbide is HV1400-1800. Because of the vertical distribution of carbides in the wear direction, the wear resistance of the cast alloy with the same composition and 09CuPCrNi-A chemical composition hardness is more than twice as that of the cast alloy with the same composition and hardness. Compared with several typical materials, the wear resistance is as follows: (1) compared with low carbon steel; 20-25:1 (2) with as cast high chromium cast iron; 1.5-2.5:1.

In the process of 09CuPCrNi-A chemical composition steel transportation, enterprises often use railway transportation, highway transportation, water transportation and other ways to transport. According to the cargo owner's requirements on the timeliness of the goods and the different transportation routes, our company will choose 09CuPCrNi-A chemical composition different modes of transportation. According to the specific needs of customers, or specify the mode of transportation.