Rolling technology of 09cupcrni-a tensile strength

The company will also put Georgetown steelworks on "care and maintenance mode" and temporarily lay off or redeploy about 130 employees working at the steelworks and contractors while some 09cupcrni-a tensile strength maintenance employees will be on staff during the closure. It is stated that unemployment insurance and state-based unemployment support will be available immediately to workers affected by these changes.

BBN company team and culture: tt the end of 2019, in order to thank employees for their hard work and enrich their sparetime lives, the company organized a pleasant trip to Phuket Island, Thailand. This tour lasted 6 days and 5 nights, and returned by plane on the evening of December 27. We took off in Zhengzhou at about 5o'clock in the afternoon on the 22th December. Let's seize the day and live it to the full, and greet the arrival of the year 2020 together.

40Cr steel is one of the most widely used steels for mechanical operations. The hardenability of this steel is outstanding, it can be hardened to Ф28 ～ 60mm when water quenching, and Ф15 ～ 40mm when oil quenching. In addition to quenching and tempering treatment, 40Cr steel is also suitable for cyanidation and high frequency quenching treatment. 40Cr steel has good cutting performance. When the hardness is 174 ～ 229HB, the relative machinability is 60%. The steel is suitable for making medium-sized plastic molds.

Q690E high strength steel chemical composition: C: 0.08-0.15, Si: 0.17-0.37, Mn: 0.40-0.70, S: ≤0.035, P: ≤0.035, Cr: 0.30～0.60, Cu: ≤0.030, Ni: ≤0.030, V: 0.15-0.30, Mo: 0.25-0.35Q690E mechanical properties:Tensile strength σb (MPa): ≥440Yield strength σs (MPa): ≥225Elongation δ5 (%): ≥22Reduction of area ψ (%): ≥50Impact energy Akv (J): ≥78

The Seamless Pipe Q345D to Thailand. In November of 2015, Thailand OTTO group contacted with us from Internet. They are finding the trustable supplier of S355/2H seamless pipe for the cable car supporter. Due to the special using of the pipes, they are very careful and serious when choosing the supplier. After one months contact and discussion by email, they come to our company. We drive to the pipe mill for visit of 2 days. Through this visit, they are very confident with our production ability and products quality. Finally, they accept the grade we suggest Q345D. After back to office, they put the order of 1800 tons pipe to us directly.

We are committed to providing customers with high-quality services, high-precision products and efficient solutions. If you have any demand for 09cupcrni-a tensile strength steel plate, steel pipe and other products, please contact us directly. We are willing to provide you with relevant product knowledge and specific specifications for free. Welcome to purchase.