Technical key points of 08cupvre plate production

SA387Gr5Cl2 steel material is suitable for refining and gas treatment in hydrogenation and conversion equipment at high temperature. The maximum thickness of 08CUPVRE plate, SA387Gr5Cl2 steel plate can reach 250mm. According to different thickness and impact requirements, the heat treatment of SA387Gr5Cl2 steel plate is normalizing plus tempering or normalizing plus rapid cooling plus tempering. By using special smelting method, the content of phosphorus is reduced so that sa387 has high brittleness resistance and good impact toughness at low temperature.

The company initially focus on providing high-quality steel products to serve for China's rapid infrastructure development. Our company vision is to be the best service provider for iron & steel 08CUPVRE plate products globally. To be an innovative business partner for our customers we aim to include sustainability in every aspect of our 08CUPVRE plate business. We also provide third-party inspection and approval services and inventory management for our customers.

Processing performance of quenched and tempered steel: 08CUPVRE plate plate can be used for cold working, bending and cutting. When the gas is cut off, cracks will not occur even without preheating. When preheating processing, quenched and tempered steel needs to be processed below the tempering temperature. Superb wear and corrosion resistance: Because it contains alloy elements such as copper and chromium, it has good corrosion resistance, higher hardness, and good wear resistance compared with ordinary steel.

Manganese steel plate is a kind of common steel, which is a kind of high-strength anti manganese steel. 08CUPVRE plate, Manganese steel plate is mainly used to bear the impact, extrusion, material wear and other severe working conditions. It is a typical anti-wear steel, with austenite and carbide as cast structure. After water quenching at about 1000 ° C, the structure changes into single austenite or austenite with a small amount of carbide.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.