Cause of corrosion pits on 05CuPCrNi elements

Our company's 05CUPCRNI elements power boilers, heating furnaces of double bars, double high lines and medium and thick plates all adopt heat storage technology, which can fully use blast furnace gas; the ladle baking, Maerz active lime kiln and medium and thick plate heat treatment furnace all burn converter gas, which can improve the 05CUPCRNI elements utilization rate of secondary energy and realize negative energy steelmaking in steelmaking process.

As the boiler steel plate 05CUPCRNI elements is working under medium temperature (below 350 ℃) and high pressure, the boiler steel plate is not only subjected to high pressure, but also subjected to impact, fatigue load and water and gas corrosion. The performance requirements for boiler steel mainly include good welding and cold bending performance, certain high temperature strength, alkali corrosion resistance, oxidation resistance, etc.

A514 gr.E quenched and tempered alloy steel chemical composition (melting analysis)%C: 0.12-0.20, Si: 0.20-0.40, Mn: 0.40-0.70, P max.: 0.035, S max.: 0.035, Cr: 1.40-2.00, Mo: 0.40-0.60, Ti: 0.01-0.10, Cu: 0.15-0.50, B: 0.001-0.005The mechanical properties in thickness (mm)T≤65Yield strength (≥Mpa): 690Tensile strength (Mpa):760-895Elongation in ≥,%: 18

If customers have any difficult problems during use of the steel materials, they can contact the company's after-sales service department to feedback the existing problems. The after-sales department will reply as soon as possible to ensure that each customer has a good after-sales experience. Under special circumstances, the after-sales service department will start the problem-solving process, and the engineers in charge of the area will quickly follow up to solve the problem.