hot rolled 09CuPTiRE-B Price in Finland 2021

The outer diameter of the hot-rolled seamless pipe is generally larger than 32mm, and the wall thickness is 2.5-75mm. The diameter of the cold-rolled seamless pipe can be 6mm, the wall thickness can be 0.25mm, the outer diameter of the thin-walled pipe can be 5mm, and the wall thickness is less than 0.25mm. The size accuracy of the cold-rolled seamless pipe is higher than that of the hot-rolled seamless pipe, hot rolled 09CuPTiRE-B.

The quality inspection department is responsible for the inspection management of raw materials and finished products, and the quality inspection and acceptance of products and raw materials. Strictly abide by the company's management system, conscientiously exercise the management power given by the company, and put an end to all ultra vires; be responsible for the inspection of all kinds of raw materials entering the company, and put forward quality problems and handling opinions.

The steel such as hot rolled 09CuPTiRE-B delivered in the hot-rolled state has a certain degree of corrosion resistance due to the high temperature, so it can be stored in the open air. However, this layer of oxide scale also makes the hot-rolled steel surface rough and the size fluctuates greatly. Therefore, the steel with smooth surface, accurate size and good mechanical properties is required to be produced by using hot-rolled semi-finished products or finished products as raw materials and then cold rolling.

Meaning of S355J2W: S is structural steel, 355 means the yield strength of 355MPa, J2 requires -20℃ impact, and the letter W indicates that the S355J2W steel has the ability to resist atmospheric corrosion. hot rolled 09CuPTiRE-B, S355J2W is a fine-grained steel, which is widely used for welding, bolting and riveting parts of high-speed rail bogies.